Are you struggling to do Wavlink WiFi extender setup? Is something always hampering the installation of your Wavlink device? If so, fret not. This article will be your go-to guide to performing the Wavlink WiFi extender setup process. So, you should get through each point mentioned below to know how to initiate the setup process.
Moreover, you will further know what to keep in check during the whole process. Without further ado, let’s dive right into the matter and help you install your Wavlink WiFi extender. Keep reading.
A Walk Through Wavlink WiFi Extender Setup
Set the Hardware
To start the Wavlink WiFi extender setup, get the Wavlink extender ready. Get it out of the box. Don’t forget the extender antennas and the Ethernet cable. Choose the perfectly working power outlet and plug your device into it. Make sure the range extender gets a consistent power supply throughout the whole setup process.
Place the Extender
Once the Wavlink WiFi extender is turned on, you need to choose the right location to set up the device. Hence, look out for the central location in your house for extender placement. A few things you must keep in check are heavy electrical gadgets, mirrors, metal objects, fish tanks, cordless phones, and baby monitors. Apart from that, keep the device away from the windows in your house.
Let’s connect the Wavlink range extender to the internet. Hence, you might need the Ethernet cable in case you want to establish a wired connection. Otherwise, you can simply form a wireless connection between the devices. To get internet access, link the Wavlink extender to the router. It is one of the most important steps of the Wavlink setup process.
Launch Web Browser
Turn on a computer or laptop (whatever you prefer) after the connections are stable. Check the power supply cable to connect the computer to the power source. Press the power button on your computer to turn it on. Launch an updated web browser to access the Wavlink WiFi extender URL. Apart from it, the chosen web browser should be compatible with the computer or laptop you are using.
Enter the Default Web Address
Once the web browser is on, enter the default Wavlink extender URL in the web browser. You must use the address bar to enter the default URL. Never use the search bar of the web browser you are using. Moreover, make sure you don’t make any mistakes or typing errors while entering the default web address. Press the Enter key after everything is in check.
Do Repeater Login
To proceed with the Wavlink setup process, you need to do Wavlink login. It helps you access the extender setup page. So, when you open the default web address, you are redirected to the extender login page. That is where you are going to use the default extender login details. So, keep your login username and password in the designated location. Click on the Login button after entering the default login credentials.
Go Through On-Screen Instructions
You get access to the Wavlink WiFi range extender setup page. Thus, you can do all the required changes on this page. You have all the wireless settings of your range extender at your disposal. Make sure your WiFi range extender settings are in sync with the settings of your router.
After everything is in check, you can save the settings. That’s it! You have completed the Wavlink WiFi extender setup.
Important Tips for Wavlink Setup
- The distance between the extender and router should be adequate.
- Further, the Ethernet cable used for connecting devices should not be worn out or have cuts.
- The power socket must not show signs of short-circuiting.
- Always enter the correct URL.
- Make sure you type in the correct login details.
The steps given above are going to help you to do the Wavlink WiFi extender setup process. In case you find any problem, you can always refer to the tips given above. Apart from that, make sure you are following the right sequence. Otherwise, you might encounter troubles while completing the setup process. After that, you get access to faster and strong internet connection.